Z4 Series 80kw Medium DC Motor

Merchandise Description:
 
DC motor is a rotating motor that can convert DC electric strength into mechanical strength (DC motor) or mechanical power into DC electric energy (DC generator). It is a motor that can convert DC and mechanical power into one particular an additional. When it operates as a motor, it is a direct current motor, which converts electrical power into mechanical vitality when it operates as a generator, it is a immediate present generator, which converts mechanical energy into electrical energy.
 

Solution Identify Z4 Sequence 80kw Medium DC Motor
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The structure of DC motor must consist of two components: stator and rotor. The static element of DC motor is called stator. The principal function of stator is to make magnetic discipline, which is composed of foundation, major magnetic pole, commutation pole, end cap, bearing and brush system. Managing element is called rotor, whose primary operate is to produce electromagnetic torque and inductive electromotive drive. It is the hub of energy conversion of DC motor. So it is also commonly referred to as armature, which consists of rotor, armature main, armature winding, commutator and fan.
Design Z Sort
Seat number Z315-Z1000
power 60~2800kW
Voltage 220~1000V
Torque selection 1.five ~180kNm
Protection amount IP23, IP44
Cooling manner IC06,IC17,IC37,IC81W
Functioning pace  Constant Speed /Low Pace /Change Speed /Large Speed Other 
Primary classification DC Motor is a device that converts mechanical strength into DC power. It is largely utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power provide of alternator. Despite the fact that in places exactly where DC electrical power is required, AC power rectifier is also employed to convert AC into DC energy, but from some aspects of functionality, AC rectifier electricity source can not fully exchange DC generator.  
Application DC motors are commonly utilised in tape recorders, movie recorders, video discs, electrical shavers, hair dryers, digital watches, toys and so on.
Maintenance strategy Expert motor maintenance heart motor routine maintenance approach: cleaning stator and rotor – replacing carbon brush or other components – vacuum F strain dipping paint – drying – Calibration equilibrium.
1. Use atmosphere should be often dry, motor floor need to be kept clean, air ingestion need to not be hindered by dust, fibers and other road blocks.
two. When the thermal defense of the motor continues to function, it must be ascertained whether or not the fault will come from the motor or the overload or the placing worth of the protecting unit is as well lower. After removing the fault, it can be place into procedure.
3, make certain that the motor is well lubricated throughout procedure. The general motor runs for about 5000 hours, that is to say, lubricating grease ought to be additional or replaced. When bearing overheating or lubricating deterioration is found in operation, the hydraulic force must adjust lubricating grease in time. When replacing grease, the aged grease should be taken off, and the oil groove of bearing and bearing include must be washed with gasoline. Then ZL-three lithium grease need to be stuffed with one/two (two poles) and two/three (4 poles, six poles and 8 poles) of the cavity in between the inner and outer rings of the bearing.
four. When the life of the bearing is over, the vibration and noise of the motor will enhance naturally. When the radial clearance of the bearing reaches the adhering to worth, the bearing should be changed.
five, when taking away the motor, it is Ok to take away the rotor from the shaft extension or the non extension stop. If it is not required to unload the fan, it is a lot more hassle-free to consider out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from being ruined.
six. When replacing the windings, the type, dimensions, turns and gauges of the authentic windings have to be recorded. When these information are lost, they ought to be received from the company and the unique designed windings need to be changed at will, which frequently deteriorates a single or several efficiency of the motor or even tends to make it extremely hard to use them.

 

 

Z4 Series 80kw Medium DC Motor