Z4-450-32 (309kw340kw200kw220kw DC Motor

Solution Description:
 
DC motor is a rotating motor that can change DC electric energy into mechanical vitality (DC motor) or mechanical energy into DC electric strength (DC generator). It is a motor that can transform DC and mechanical power into one yet another. When it runs as a motor, it is a direct existing motor, which converts electrical power into mechanical energy when it operates as a generator, it is a immediate recent generator, which converts mechanical vitality into electrical vitality.
 

Product Title Z4-450-32 (309kw340kw200kw220kw DC Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition composition The structure of DC motor must consist of two areas: stator and rotor. The static part of DC motor is referred to as stator. The major purpose of stator is to produce magnetic discipline, which is composed of base, main magnetic pole, commutation pole, conclude cap, bearing and brush unit. Managing portion is referred to as rotor, whose main operate is to produce electromagnetic torque and inductive electromotive pressure. It is the hub of power conversion of DC motor. So it is also commonly called armature, which is composed of rotor, armature main, armature winding, commutator and supporter.
Model Z Type
Seat variety Z315-Z1000
energy sixty~2800kW
Voltage 220~1000V
Torque range 1.5 ~180kNm
Safety amount IP23, IP44
Cooling manner IC06,IC17,IC37,IC81W
Running velocity  Constant Speed /Reduced Velocity /Modify Speed /Higher Speed Other 
Main classification DC Motor is a equipment that converts mechanical strength into DC power. It is primarily used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power offer of alternator. Although in places in which DC energy is required, AC energy rectifier is also employed to transform AC into DC energy, but from some facets of overall performance, AC rectifier power source can not entirely replace DC generator.  
Application DC motors are commonly utilized in tape recorders, video clip recorders, online video discs, electric powered shavers, hair dryers, electronic watches, toys and so on.
Upkeep method Professional motor routine maintenance middle motor routine maintenance method: cleansing stator and rotor – replacing carbon brush or other parts – vacuum F strain dipping paint – drying – Calibration equilibrium.
one. Use setting should be constantly dry, motor floor need to be retained clean, air ingestion ought to not be hindered by dust, fibers and other road blocks.
two. When the thermal defense of the motor continues to run, it ought to be ascertained no matter whether the fault arrives from the motor or the overload or the placing worth of the protecting system is as well lower. Soon after removing the fault, it can be place into procedure.
three, make certain that the motor is effectively lubricated during operation. The standard motor operates for about 5000 several hours, that is to say, lubricating grease should be added or changed. When bearing overheating or lubricating deterioration is found in operation, the hydraulic pressure ought to adjust lubricating grease in time. When changing grease, the aged grease ought to be eliminated, and the oil groove of bearing and bearing cover must be washed with gasoline. Then ZL-three lithium grease need to be loaded with 1/two (two poles) and 2/three (four poles, six poles and 8 poles) of the cavity between the internal and outer rings of the bearing.
four. When the lifestyle of the bearing is over, the vibration and noise of the motor will improve clearly. When the radial clearance of the bearing reaches the pursuing value, the bearing should be replaced.
5, when getting rid of the motor, it is Okay to eliminate the rotor from the shaft extension or the non extension conclude. If it is not needed to unload the supporter, it is a lot more hassle-free to get out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from currently being destroyed.
six. When changing the windings, the kind, measurement, turns and gauges of the first windings have to be recorded. When these data are misplaced, they must be received from the manufacturer and the first designed windings must be modified at will, which frequently deteriorates 1 or many efficiency of the motor or even makes it unattainable to use them.

 

 

Z4-450-32 (309kw340kw200kw220kw DC Motor