Tk Series Synchronous Motor for Drive Compressors and Pumps Tk8000-18 2900 8000kv 6kv IP20

I. Overview
The massive 3-stage synchronous motor for TK sequence air compressor is a substantial-efficiency collection item specifically created and created by our organization for the load of air compressor.
This sequence of motors adopts new technological innovation, new materials, new procedures, exquisite materials variety, and refined manufacturing. It has the qualities of small measurement, light-weight fat, beautiful appearance, large effectiveness, lower sound, low vibration, safe and reputable procedure, and hassle-free use and routine maintenance.

two. Implementation expectations
GB755 Rotating Motor Ranking and Overall performance
Classification of GB/T997 rotary motor construction sort, set up variety and junction box position (IM code)
GB/T1571 3-stage synchronous motor check technique
GB/T1993 Rotating Equipment Cooling Approach
GB/T4942.one Safety class (IP) classification of the general framework of rotating electrical devices
GB/T10068 The measurement, evaluation and limit of mechanical vibration with a shaft heart peak of 56mm and over
GB/T10069 Rotating Device Noise Measurement Strategy and Limit
JB/T8667.1 CZPT Conditions of Large A few-section Synchronous Motor Part 1: TK Collection
3. Simple technological parameters
Electricity selection: 250~10000KW
Rated voltage: 6000, 10000V
Rated speed: 250, 273, 300, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Safety degree: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling technique: IC01, IC37, IC81W
Set up approach: IM7311, IM5710, IM7312, IM7315
*Can be created according to other parameters according to consumer demands
4, complex attributes
4.1 The structural layout is realistic, protected and reliable, and the ability to stage out of action is strong.
4.2 The principal insulation framework using new insulating materials has large voltage resistance and long motor existence.
4.3 The temperature rise margin is huge. The motor adopts F-class insulation, and the temperature rise is assessed in accordance to the temperature increase restrict of the B pole insulation.
four.4 The defense system is innovative and full.
4.one.one The stator windings and bearings are equipped with temperature detection gadgets, which can detect, alarm and trip.
4.4.2 Shutdown place heater with anti-condensation result.
4.five Big inertia. Motors with various moments of inertia can be made in accordance to user demands.
Five, construction variety
5.one The total composition of this series of motors is welded with metal plates for the body, finish go over, and base plate. The motor is an unbiased cavity, and the slip ring can be created with distinct safety stages in accordance to consumer requirements.
5.2 Stator: The stator body is welded by metal plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet place can be led out from the reduce component of the foundation or from the major junction box on the aspect of the motor.
The stator core is superimposed by low-loss silicon steel sheets, and the core sections are divided by radial air flow ducts.
The stator winding is F quality insulation, and the temperature increase is assessed in accordance to B grade to help extend the support life. It adopts VPI total dipping paint treatment method, which has large electrical performance, mechanical strength, insulation performance, humidity resistance and thermal steadiness.
five.3 The rotor magnetic pole main is produced of laminated metal plates, and has various buildings such as magnetic pole screws and T tails. The rotor bracket has air flow holes and is geared up with a supporter, which can effectively management the temperature rise of the rotor.
5.4 Undertake seat variety spherical sliding bearing. The bearings are insulated to prevent shaft currents.
Use new lubricating oil and slender-walled bearing alloy tiles, and set electromagnetic centerline indicators.
five.five In accordance to user requirements, the slip ring can be designed as a good force air flow composition to increase the basic safety of the motor. The total duration of the motor with the good stress ventilation structure of the slip ring is a bit enhanced.
6. Circumstances of Use
six.one Voltage fluctuation: ±5% (It can operate beneath ±10% underneath the conditions of seven.3 in GB755)
6.two Frequency fluctuation: ±2%
6.three The altitude does not exceed 1000m
6.four The maximum ambient temperature does not exceed +40ºC, and the bare minimum is 0ºC.
7, product description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Amount of poles (sixteen poles)

Rated electricity (1250KW)
A few-stage synchronous motor for compressor
eight. Purchasing guidelines
eight.one Just before inserting an purchase, please refer to the product catalog of this series to clarify the necessary item design, specs and other info. If there is a discrepancy among the specs and the samples, please get in touch with our organization.
8.2 The motor product, rated electricity, synchronous velocity, rated voltage, rated frequency, defense degree, minute of inertia, rotation path, installation sort, and so on. need to be indicated when buying.
eight.three The sample technical info sheet only lists the appropriate knowledge of motors with rated voltages of 6KV and 10KV. If customers need other voltage amounts, our organization can also supply related technical info when ordering.
8.4 The technical info and dimensions in the sample are only for reference when the consumer selects the model. The formal details will be offered by the business right after the contract or technological arrangement is signed.
8.five If there are any other specific specifications, remember to give the needs and indicator the related technological settlement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk8000-18 2900 8000kv 6kv IP20