Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4500-18 2600 4500kv 6kv IP20

I. Overview
The huge a few-phase synchronous motor for TK series air compressor is a higher-performance collection solution specifically made and designed by our firm for the load of air compressor.
This series of motors adopts new technologies, new materials, new processes, beautiful substance selection, and innovative production. It has the characteristics of little measurement, light weight, gorgeous appearance, substantial efficiency, low sounds, minimal vibration, protected and reliable procedure, and practical use and servicing.

2. Implementation requirements
GB755 Rotating Motor Ranking and Efficiency
Classification of GB/T997 rotary motor structure variety, set up variety and junction box placement (IM code)
GB/T1571 Three-phase synchronous motor take a look at strategy
GB/T1993 Rotating Equipment Cooling Strategy
GB/T4942.1 Security class (IP) classification of the overall construction of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft middle top of 56mm and earlier mentioned
GB/T10069 Rotating Device Sounds Measurement Technique and Limit
JB/T8667.1 CZPT Conditions of Huge Three-stage Synchronous Motor Portion 1: TK Collection
three. Simple complex parameters
Electricity range: 250~10000KW
Rated voltage: 6000, 10000V
Rated speed: 250, 273, three hundred, 333, 375, 428, five hundred, 600r/min
Rated frequency: 50HZ
Defense amount: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling method: IC01, IC37, IC81W
Installation strategy: IM7311, IM5710, IM7312, IM7315
*Can be created according to other parameters according to person demands
Four, complex characteristics
4.one The structural design and style is realistic, safe and trustworthy, and the potential to phase out of step is sturdy.
4.two The main insulation construction using new insulating components has higher voltage resistance and lengthy motor life.
four.3 The temperature increase margin is huge. The motor adopts F-class insulation, and the temperature increase is assessed according to the temperature increase limit of the B pole insulation.
4.4 The safety gadget is sophisticated and comprehensive.
4.one.1 The stator windings and bearings are equipped with temperature detection products, which can detect, alarm and excursion.
4.4.two Shutdown area heater with anti-condensation impact.
4.5 Massive inertia. Motors with various moments of inertia can be developed according to person needs.
Five, construction variety
5.1 The general structure of this series of motors is welded with steel plates for the frame, stop go over, and bottom plate. The motor is an unbiased cavity, and the slip ring can be made with various safety ranges according to person specifications.
5.2 Stator: The stator body is welded by steel plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet placement can be led out from the reduced part of the foundation or from the principal junction box on the side of the motor.
The stator main is superimposed by minimal-loss silicon metal sheets, and the core sections are separated by radial air flow ducts.
The stator winding is F grade insulation, and the temperature increase is assessed according to B quality to assist increase the provider life. It adopts VPI all round dipping paint therapy, which has large electrical overall performance, mechanical toughness, insulation overall performance, dampness resistance and thermal security.
5.three The rotor magnetic pole core is produced of laminated metal plates, and has diverse constructions this kind of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is equipped with a fan, which can effectively manage the temperature rise of the rotor.
5.four Adopt seat sort spherical sliding bearing. The bearings are insulated to stop shaft currents.
Use new lubricating oil and slender-walled bearing alloy tiles, and established electromagnetic centerline signs.
five.5 According to user needs, the slip ring can be designed as a optimistic stress air flow construction to improve the safety of the motor. The total duration of the motor with the good pressure air flow framework of the slip ring is marginally improved.
6. Circumstances of Use
six.one Voltage fluctuation: ±5% (It can run below ±10% under the conditions of 7.3 in GB755)
six.2 Frequency fluctuation: ±2%
six.three The altitude does not exceed 1000m
6.four The highest ambient temperature does not exceed +40ºC, and the least is 0ºC.
7, product description
 TK1250-16/2150

Outer diameter of stator punch (Φ2150mm)

Amount of poles (16 poles)

Rated energy (1250KW)
A few-period synchronous motor for compressor
eight. Purchasing recommendations
eight.one Before placing an buy, make sure you refer to the item catalog of this series to clarify the required solution model, technical specs and other information. If there is a discrepancy among the technical specs and the samples, make sure you contact our firm.
eight.2 The motor model, rated energy, synchronous velocity, rated voltage, rated frequency, protection amount, moment of inertia, rotation course, installation kind, and so on. need to be indicated when purchasing.
8.3 The sample technical knowledge sheet only lists the pertinent info of motors with rated voltages of 6KV and 10KV. If customers require other voltage stages, our business can also supply relevant technological knowledge when purchasing.
8.four The technical info and dimensions in the sample are only for reference when the consumer selects the product. The official info will be supplied by the business after the deal or technological arrangement is signed.
8.5 If there are any other special specifications, please give the requirements and sign the pertinent complex settlement when purchasing.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk4500-18 2600 4500kv 6kv IP20