Mini-Gear Oil Pump 13 1 Bio-Diesel Motor Fuel Transfer

Electricity WCB Mini-Equipment Oil Pump

All Metallic Equipment Pump
This pump was originally made for pumping diesel fuel. It may possibly be utilized for pumping oily liquids these kinds of as diesel, biodiesel, kerosene, and warm vegetable oil or cold vegetable oil if commenced up appropriately (see below). This pump functions outstanding for biodiesel processor purposes.
This pump can handle viscous fluids this kind of as vegetable oil. When the oil is very hot, the pump handles it CZPT any difficulties. If the oil is chilly, typically considerably less than 70°, the pump may want a tiny soar start to get it managing up to full velocity. In buy to do this, put in a ball valve somewhere on the suction side of the pump. Near the ball valve and switch on the pump. Once the pump is up to full rotation (1 second or considerably less) the ball valve can be opened and it will pump the oil with no problem. This may also be accomplished by eliminating the suction line from a tank of oil. Allow the pump to suck air initial to get up to pace, then dump the suction hose into the tank and it will suck the oil through easily. The pump has a higher rotation fee, so if the pump commences with viscous fluid presently in the lines, the pump will wrestle to get up to speed and will use way too a lot of amps and overheat. Enabling the pump to get up to total velocity prior to introducing thick fluids is recommended. Usually, this pump does not need to have any sort of guidance for fuel oils such as diesel gas.
The mini-equipment pump is a pump hooked up to the motor by a shaft. The pump alone is all steel (metallic gears) and can pump very hot fluids CZPT overheating the independent motor which is linked by a metallic shaft coupling. The motor is higher power and has thermal protection, which will automatically shut off the pump in scenario temperatures get to amounts which danger overheating of the motor.
The motor is produced to most Usa Technical specs.
These pumps generate strong suction and are self-priming. They can operate dry for intermediate amounts of time, permitting for the use of a suction hose for gathering fluids from a tank. The metal gears which generate the pumping action can take care of a whole lot of fluids, even if partly soiled. In the circumstance of vegetable oil, any gentle particles will go proper through the pump with no difficulties, and are frequently pulverized by the gears themselves. Difficult components, this kind of as metals, must not be permitted to pass by way of the pump to avert harm.
 
WVO Selection:
These pumps have high suction energy and are excellent for amassing vegetable oil (when warm sufficient) from tanks. Whether basically transferring oil or collecting oil, these pumps produce quick pumping with no want for priming the suction hose.
 
Biodiesel:
These pumps are regarded to be significantly safer for biodiesel production than the harbor freight very clear h2o pumps since the pump is individual from the motor. The benefits of the steady operation and substantial movement prices make this an outstanding pump for a biodiesel processor. It will pump the squander vegetable oil, biodiesel and even glycerin CZPT any problems.
 
Viscous & Chilly Oils:
This pump can manage viscous fluids this sort of as vegetable oil. When the oil is hot, the pump handles it CZPT any troubles. If the oil is chilly, typically significantly less than 70°, the pump may need to have a little leap commence to get it operating up to full pace. In get to do this, set up a ball valve somewhere on the suction side of the pump. Close the ball valve and switch on the pump. When the pump is up to full rotation (1 2nd or considerably less) the ball valve can be opened and it will pump the oil with no difficulty. This may possibly also be carried out by eliminating the suction line from a tank of oil. Enable the pump to suck air first to get up to speed, then dump the suction hose into the tank and it will suck the oil through easily. The pump has a high rotation rate, so if the pump starts off with viscous fluid previously in the traces, the pump will wrestle to get up to speed and will use as well a lot of amps and overheat. Making it possible for the pump to get up to full speed prior to introducing thick fluids is advisable. Generally, this pump does not require any sort of support for gas oils these kinds of as diesel fuel.
 
Procedure Suggestions:
Although the pump can operate dry for the situation of priming, it is greatest not to operate the pump dry repeatedly for a prolonged period of time to avoid the danger of hurt to the pump from deficiency of lubrication. Fluids ought to be kept clear to keep away from clogging of the gears. Coarse strainers (four hundred+ micron) can be employed on the suction finish to avert big particles from coming into the pump. Do not use fantastic filters on the suction side or the restriction will avert sufficient movement.
Users who pump vegetable oil ought to also be informed of that often when cold oil sits in the pump, the pump can have trouble obtaining up to pace. If this occurs, the pump ought to be started out with air on the suction line or with a ball valve on the suction line entirely shut. After the pump is up to pace (a issue of 1 or two seconds) the ball valve can be opened or fluid launched to the pump and it will pump as normal.
Connections:
Our Electricity WCB Mini-equipment Pumps arrive with a flange attachment and a fitting to expand the size of the port. We use the flange to stop pressure drop likely into the head of the pump. This flange has a fluoroelastomer (like Viton®) gasket for a biodiesel compatible seal. This flange can be changed with another flange of your option if need be.
Stainless Steel Pump CZPTs: For pumps with stainless steel heads, we presently do not have flanges CZPT, and the connections are manufactured right to the enlargement fittings. Some force reduction major to the head may happen on these pumps and partly reduce movement of the fluid from technical specs unless of course a flange is connected.
 
Lubrication
This pump can only be utilized for pumping oily liquids. It can not be employed for liquids that are non-lubricating or the gears in the pump will lock up and corrode.
 
Piping:

Use a sound pipe or powerful hose that will not collapse beneath the large vacuum created from the suction of the pump. The pump will come with fittings, which adapt to the appropriate measurement of piping/tubing necessary for ample circulation. it is greatest not to dimension down the suction aspect apart from in the situation of the WCB75, in which it can be sized down to 1-one/four” piping for better suction as opposed to better movement charge.
 

WCB Mini-Equipment Pump CZPT Parameters

Design

WCB30

WCB50

WCB75

Movement rate

30 L/m (eight gpm)

fifty L/m (thirteen gpm)

seventy five L/m (20 gpm)

Pressure

.3 Mpa (forty three psi)

.3 Mpa (43 psi)

.3 Mpa (43 psi)

Max Suction Peak

five meters (sixteen ft)

five meters (16 ft)

With 1.five” Tubing: four Meters (12.eight Toes)
With 1.25″ Tubing: 5 meters (sixteen toes)

Max CZPT

30 Meters

30 Meters

30 Meters

Pump Housing

Cast Iron or Stainless Steel

Proportions (LxWxH)

15″x6.5″x8″

fifteen”x6.5″x8″

sixteen”x6.five”x8″

Input Voltage

110v AC / 60 Hz

110v AC / sixty Hz

110v AC / 60 Hz

Speed (rpm)

3480

3480

3480

Max Electricity

.375 KW (one/two HP)

.550 KW (3/4 HP)

.750 KW (1 HP)

Inlet/Outlet Threads

three/four” NPT

one” NPT

1.5″ NPT

Excess weight

fourteen.27 kg (31.four lb)

fifteen.22 kg (33.fifty lb)

17.ninety five kg (39.50 lb)

Mini-Gear Oil Pump 13 1 Bio-Diesel Motor Fuel Transfer