Kraft Paper Slitting Rewinding Machine

Kraft Paper Slitting RewindingMachine

It utilised for slitting paper, kraft paper, paper board, card board, bond paper, non-woven cloth, film, aluminium foil and so on.

1. It adopts Siemens PLC control technique and 7″ touch screen, all the doing work parameters can be displayed on the management panel then the machine will computerized perform.
two. It adopts two sets of Yaskawa frequency inverter which is from Japan to make functioning machine more stable.
three. It adopts two sets of Fukuta inverter motor, which is from ZheJiang .
four. It adopts three sets entirely computerized stress management to supply the continual pressure to the finish.
5. Computerized carry-up loading system for hefty jumbo roll loading.
6. A established of photocell monitoring system imported from Germany.
7. Two types of blades: Spherical blades and razor blades.
eight. Automatic meter counter to cease the equipment when it attain the pre-set length.
9. Air Blower and blower pipe for trimming the waste edge.
ten. All transmission rollers have been dynamic/static harmony taken care of.

Technical specs
Classification Computerized Shaftless & Coreless Paper Slitter Device
Software Materials Normal Papers,Kraft Paper, Bond Paper, Paper Board,Non-woven Cloth, Film, Aluminum Foil, CZPT Sheet and so forth.
Applicable Width of Axial / Materials 600mm ~ 2800mm /23.six-one hundred ten” (CZPTizable)
Min. Width of Slitting 10mm (Dependent on varieties of source substance are utilized)
Max.Device Velocity 300m/min (Relying on types of content used)
Max.Unwinding Diameter 1500mm /fifty nine”
Max.Rewinding Diameter 1500mm(CZPTizable)
Tolerance of Slitting Width ±0.15mm(Depending on kinds of material used)
Max Relevant Weight of Substance 4000 Kg (CZPTizable)
Rated Frequency 50Hz & 60Hz
Rated Voltage 380V,415V, 440V, 460V, 480V,or Dual-Voltage (CZPTizable)
Unwinding/Rewinding Shaft Shaftless unwinder & Pneumatic Air Increasing Shaft
General Proportions 2000 x 2500 x 1500mm
Bodyweight 4000kg


Environmental Restriction
Spot Indoor. The merchandise need to be installed   on flat and strong basis.
Voltage Regulation ±10%
Frequency Regulation ±5%
Ambient Temperature -5°C~40°C
Altitude Not exceed a thousand Meters
Relative Humidity Considerably less than eighty five% RH (Non-Condensation)


Unwinding Part -Shaftless unwinder,the cam dimension is 3”&6” 
-CZPT computerized lift-up loading method
-Tech Mach analog EPC from Usa
-RE Brake from Italy
-Tech Mach Floating roller constant rigidity from United states of america
-Tech Mach Sensor from United states
-Self expandable chuck
-Xihu (West Lake) Dis. & Slide AMT from ZheJiang
Slitting Part -Alternatives of Razor cutter or Disc cutter
-Disc Cutter Assembly adopt the cam self-locking
-Cutter with adjustable and moveable blade base.
-Meter counter
Rewinding Segment -3″air growing rewinding corelessshafts
-Heart Rewinding technologies
-Pressure roller
-Electromagnetic Clutch from ZheJiang
Managing Segment -Siemens PLC & HMI from Germany
-All the parametersare displayed on the keep an eye on
-Minimal voltage electrical appliances all from Schneider
Trimmed Squander Edge -Edge Squander Blower with Expulsion Tube
Optional -Friction Differential Shaft for rewinding.
-Safety guard for the slitting unit.
-Unexpected emergency Switches on the 4 corner of machine.


Identify Product Pieces Remark
Laptop System PLC(Siemens)+4DA+7”Touch Screen(ZheJiang )+
1Set Siemens+ Weinview
 Motor   two Sets FUKUTA From ZheJiang
Frequency Inverter   two Sets YASKAWA From Japan
Higher/Reduce Spherical Knife   ten Sets Jota CZPT
Brake     RE Brake from Italy
Sensor   2 Sets Tech Mach Sensor from Usa
Stress handle   three Sets Tech Mach Floating roller consistent rigidity from United states
EPC   1 Set Tech Mach analog from United states of america
Chuck Self expandable chuck one Established From ZheJiang
Photocell Tracking   2 Established SIKC From Germany
Magnetic Clutch   two Sets From ZheJiang
Lower Voltage CZPTal Switch     SCHNEIDER
Blower   one Set China

Kraft Paper Slitting Rewinding Machine